mastodon/app/views/settings/two_factor_authentication/confirmations/new.html.haml

- content_for :page_title do
  = t('settings.two_factor_authentication')

= simple_form_for @confirmation, url: settings_two_factor_authentication_confirmation_path, method: :post do |f|
  %p.hint= t('otp_authentication.instructions_html')

  .qr-wrapper
    .qr-code!= @qrcode.as_svg(padding: 0, module_size: 4)

    .qr-alternative
      %p.hint= t('otp_authentication.manual_instructions')
      %samp.qr-alternative__code= @new_otp_secret.scan(/.{4}/).join(' ')

  .fields-group
    = f.input :otp_attempt, wrapper: :with_label, hint: t('otp_authentication.code_hint'), label: t('simple_form.labels.defaults.otp_attempt'), input_html: { autocomplete: 'off' }, required: true

  .actions
    = f.button :button, t('otp_authentication.enable'), type: :submit
2FA controller cleanup (#2296) * Add spec coverage for settings/two_factor_auth area * extract setup method for qr code * Move otp required check to before action * Merge method only used once * Remove duplicate view * Consolidate creation of @codes for backup * Move settings/2fq#recovery_codes to settings/recovery_codes#create * Rename settings/two_factor_auth#disable to #destroy * Add coverage for the otp required path on 2fa#show * Clean up the recovery codes list styles * Move settings/two_factor_auth to settings/two_factor_authentication * Reorganize the settings two factor auth area Updated to use a flow like: - settings/two_factor_authentication goes to a #show view which has a button either enable or disable 2fa on the account - the disable button turns off the otp requirement for the user - the enable button cycles the user secret and redirects to a confirmation page - the confirmation page is a #new view which shows the QR code for user - that page posts to #create which verifies the code, and creates the recovery codes - that create action shares a view with a recovery codes controller which can be used separately to reset codes if needed 2017-04-22 02:23:17 +00:00			`- content_for :page_title do`
			`= t('settings.two_factor_authentication')`

			`= simple_form_for @confirmation, url: settings_two_factor_authentication_confirmation_path, method: :post do \|f\|`
Add WebAuthn as an alternative 2FA method (#14466) * feat: add possibility of adding WebAuthn security keys to use as 2FA This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor to the Settings page for editing the 2FA methods – now it will list the methods that are available to the user (TOTP and WebAuthn) and from there they'll be able to add or remove any of them. Also, it's worth mentioning that for enabling WebAuthn it's required to have TOTP enabled, so the first time that you go to the 2FA Settings page, you'll be asked to set it up. This work was inspired by the one donde by Github in their platform, and despite it could be approached in different ways, we decided to go with this one given that we feel that this gives a great UX. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add request for WebAuthn as second factor at login if enabled This commits adds the feature for using WebAuthn as a second factor for login when enabled. If users have WebAuthn enabled, now a page requesting for the use of a WebAuthn credential for log in will appear, although a link redirecting to the old page for logging in using a two-factor code will also be present. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add possibility of deleting WebAuthn Credentials Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: disable WebAuthn when an Admin disables 2FA for a user Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: remove ability to disable TOTP leaving only WebAuthn as 2FA Following examples form other platforms like Github, we decided to make Webauthn 2FA secondary to 2FA with TOTP, so that we removed the possibility of removing TOTP authentication only, leaving users with just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA' in order to remove second factor auth. The reason for WebAuthn being secondary to TOPT is that in that way, users will still be able to log in using their code from their phone's application if they don't have their security keys with them – or maybe even lost them. * We had to change a little the flow for setting up TOTP, given that now it's possible to setting up again if you already had TOTP, in order to let users modify their authenticator app – given that now it's not possible for them to disable TOTP and set it up again with another authenticator app. So, basically, now instead of storing the new `otp_secret` in the user, we store it in the session until the process of set up is finished. This was because, as it was before, when users clicked on 'Edit' in the new two-factor methods lists page, but then went back without finishing the flow, their `otp_secret` had been changed therefore invalidating their previous authenticator app, making them unable to log in again using TOTP. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * refactor: fix eslint errors The PR build was failing given that linting returning some errors. This commit attempts to fix them. * refactor: normalize i18n translations The build was failing given that i18n translations files were not normalized. This commits fixes that. * refactor: avoid having the webauthn gem locked to a specific version * refactor: use symbols for routes without '/' * refactor: avoid sending webauthn disabled email when 2FA is disabled When an admins disable 2FA for users, we were sending two mails to them, one notifying that 2FA was disabled and the other to notify that WebAuthn was disabled. As the second one is redundant since the first email includes it, we can remove it and send just one email to users. * refactor: avoid creating new env variable for webauthn_origin config * refactor: improve flash error messages for webauthn pages Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> 2020-08-24 14:46:27 +00:00			`%p.hint= t('otp_authentication.instructions_html')`
2FA controller cleanup (#2296) * Add spec coverage for settings/two_factor_auth area * extract setup method for qr code * Move otp required check to before action * Merge method only used once * Remove duplicate view * Consolidate creation of @codes for backup * Move settings/2fq#recovery_codes to settings/recovery_codes#create * Rename settings/two_factor_auth#disable to #destroy * Add coverage for the otp required path on 2fa#show * Clean up the recovery codes list styles * Move settings/two_factor_auth to settings/two_factor_authentication * Reorganize the settings two factor auth area Updated to use a flow like: - settings/two_factor_authentication goes to a #show view which has a button either enable or disable 2fa on the account - the disable button turns off the otp requirement for the user - the enable button cycles the user secret and redirects to a confirmation page - the confirmation page is a #new view which shows the QR code for user - that page posts to #create which verifies the code, and creates the recovery codes - that create action shares a view with a recovery codes controller which can be used separately to reset codes if needed 2017-04-22 02:23:17 +00:00
			`.qr-wrapper`
Added haml-lint and fix warnings (#2773) * add haml_lint to Gemfile * add .haml-lint.yml * fix warnings of haml_lint 2017-05-08 01:35:25 +00:00			`.qr-code!= @qrcode.as_svg(padding: 0, module_size: 4)`
2FA controller cleanup (#2296) * Add spec coverage for settings/two_factor_auth area * extract setup method for qr code * Move otp required check to before action * Merge method only used once * Remove duplicate view * Consolidate creation of @codes for backup * Move settings/2fq#recovery_codes to settings/recovery_codes#create * Rename settings/two_factor_auth#disable to #destroy * Add coverage for the otp required path on 2fa#show * Clean up the recovery codes list styles * Move settings/two_factor_auth to settings/two_factor_authentication * Reorganize the settings two factor auth area Updated to use a flow like: - settings/two_factor_authentication goes to a #show view which has a button either enable or disable 2fa on the account - the disable button turns off the otp requirement for the user - the enable button cycles the user secret and redirects to a confirmation page - the confirmation page is a #new view which shows the QR code for user - that page posts to #create which verifies the code, and creates the recovery codes - that create action shares a view with a recovery codes controller which can be used separately to reset codes if needed 2017-04-22 02:23:17 +00:00
			`.qr-alternative`
Add WebAuthn as an alternative 2FA method (#14466) * feat: add possibility of adding WebAuthn security keys to use as 2FA This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor to the Settings page for editing the 2FA methods – now it will list the methods that are available to the user (TOTP and WebAuthn) and from there they'll be able to add or remove any of them. Also, it's worth mentioning that for enabling WebAuthn it's required to have TOTP enabled, so the first time that you go to the 2FA Settings page, you'll be asked to set it up. This work was inspired by the one donde by Github in their platform, and despite it could be approached in different ways, we decided to go with this one given that we feel that this gives a great UX. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add request for WebAuthn as second factor at login if enabled This commits adds the feature for using WebAuthn as a second factor for login when enabled. If users have WebAuthn enabled, now a page requesting for the use of a WebAuthn credential for log in will appear, although a link redirecting to the old page for logging in using a two-factor code will also be present. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add possibility of deleting WebAuthn Credentials Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: disable WebAuthn when an Admin disables 2FA for a user Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: remove ability to disable TOTP leaving only WebAuthn as 2FA Following examples form other platforms like Github, we decided to make Webauthn 2FA secondary to 2FA with TOTP, so that we removed the possibility of removing TOTP authentication only, leaving users with just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA' in order to remove second factor auth. The reason for WebAuthn being secondary to TOPT is that in that way, users will still be able to log in using their code from their phone's application if they don't have their security keys with them – or maybe even lost them. * We had to change a little the flow for setting up TOTP, given that now it's possible to setting up again if you already had TOTP, in order to let users modify their authenticator app – given that now it's not possible for them to disable TOTP and set it up again with another authenticator app. So, basically, now instead of storing the new `otp_secret` in the user, we store it in the session until the process of set up is finished. This was because, as it was before, when users clicked on 'Edit' in the new two-factor methods lists page, but then went back without finishing the flow, their `otp_secret` had been changed therefore invalidating their previous authenticator app, making them unable to log in again using TOTP. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * refactor: fix eslint errors The PR build was failing given that linting returning some errors. This commit attempts to fix them. * refactor: normalize i18n translations The build was failing given that i18n translations files were not normalized. This commits fixes that. * refactor: avoid having the webauthn gem locked to a specific version * refactor: use symbols for routes without '/' * refactor: avoid sending webauthn disabled email when 2FA is disabled When an admins disable 2FA for users, we were sending two mails to them, one notifying that 2FA was disabled and the other to notify that WebAuthn was disabled. As the second one is redundant since the first email includes it, we can remove it and send just one email to users. * refactor: avoid creating new env variable for webauthn_origin config * refactor: improve flash error messages for webauthn pages Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> 2020-08-24 14:46:27 +00:00			`%p.hint= t('otp_authentication.manual_instructions')`
			`%samp.qr-alternative__code= @new_otp_secret.scan(/.{4}/).join(' ')`
2FA controller cleanup (#2296) * Add spec coverage for settings/two_factor_auth area * extract setup method for qr code * Move otp required check to before action * Merge method only used once * Remove duplicate view * Consolidate creation of @codes for backup * Move settings/2fq#recovery_codes to settings/recovery_codes#create * Rename settings/two_factor_auth#disable to #destroy * Add coverage for the otp required path on 2fa#show * Clean up the recovery codes list styles * Move settings/two_factor_auth to settings/two_factor_authentication * Reorganize the settings two factor auth area Updated to use a flow like: - settings/two_factor_authentication goes to a #show view which has a button either enable or disable 2fa on the account - the disable button turns off the otp requirement for the user - the enable button cycles the user secret and redirects to a confirmation page - the confirmation page is a #new view which shows the QR code for user - that page posts to #create which verifies the code, and creates the recovery codes - that create action shares a view with a recovery codes controller which can be used separately to reset codes if needed 2017-04-22 02:23:17 +00:00
Redesign forms, verify link ownership with rel="me" (#8703) * Verify link ownership with rel="me" * Add explanation about verification to UI * Perform link verifications * Add click-to-copy widget for verification HTML * Redesign edit profile page * Redesign forms * Improve responsive design of settings pages * Restore landing page sign-up form * Fix typo * Support <link> tags, add spec * Fix links not being verified on first discovery and passive updates 2018-09-18 14:45:58 +00:00			`.fields-group`
Fix style for hashes (#20518) * Fix style for hashes Make the style for hashes consistent. * New style More consistency 2022-11-17 10:05:39 +00:00			`= f.input :otp_attempt, wrapper: :with_label, hint: t('otp_authentication.code_hint'), label: t('simple_form.labels.defaults.otp_attempt'), input_html: { autocomplete: 'off' }, required: true`
2FA controller cleanup (#2296) * Add spec coverage for settings/two_factor_auth area * extract setup method for qr code * Move otp required check to before action * Merge method only used once * Remove duplicate view * Consolidate creation of @codes for backup * Move settings/2fq#recovery_codes to settings/recovery_codes#create * Rename settings/two_factor_auth#disable to #destroy * Add coverage for the otp required path on 2fa#show * Clean up the recovery codes list styles * Move settings/two_factor_auth to settings/two_factor_authentication * Reorganize the settings two factor auth area Updated to use a flow like: - settings/two_factor_authentication goes to a #show view which has a button either enable or disable 2fa on the account - the disable button turns off the otp requirement for the user - the enable button cycles the user secret and redirects to a confirmation page - the confirmation page is a #new view which shows the QR code for user - that page posts to #create which verifies the code, and creates the recovery codes - that create action shares a view with a recovery codes controller which can be used separately to reset codes if needed 2017-04-22 02:23:17 +00:00
			`.actions`
Add WebAuthn as an alternative 2FA method (#14466) * feat: add possibility of adding WebAuthn security keys to use as 2FA This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor to the Settings page for editing the 2FA methods – now it will list the methods that are available to the user (TOTP and WebAuthn) and from there they'll be able to add or remove any of them. Also, it's worth mentioning that for enabling WebAuthn it's required to have TOTP enabled, so the first time that you go to the 2FA Settings page, you'll be asked to set it up. This work was inspired by the one donde by Github in their platform, and despite it could be approached in different ways, we decided to go with this one given that we feel that this gives a great UX. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add request for WebAuthn as second factor at login if enabled This commits adds the feature for using WebAuthn as a second factor for login when enabled. If users have WebAuthn enabled, now a page requesting for the use of a WebAuthn credential for log in will appear, although a link redirecting to the old page for logging in using a two-factor code will also be present. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: add possibility of deleting WebAuthn Credentials Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: disable WebAuthn when an Admin disables 2FA for a user Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * feat: remove ability to disable TOTP leaving only WebAuthn as 2FA Following examples form other platforms like Github, we decided to make Webauthn 2FA secondary to 2FA with TOTP, so that we removed the possibility of removing TOTP authentication only, leaving users with just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA' in order to remove second factor auth. The reason for WebAuthn being secondary to TOPT is that in that way, users will still be able to log in using their code from their phone's application if they don't have their security keys with them – or maybe even lost them. * We had to change a little the flow for setting up TOTP, given that now it's possible to setting up again if you already had TOTP, in order to let users modify their authenticator app – given that now it's not possible for them to disable TOTP and set it up again with another authenticator app. So, basically, now instead of storing the new `otp_secret` in the user, we store it in the session until the process of set up is finished. This was because, as it was before, when users clicked on 'Edit' in the new two-factor methods lists page, but then went back without finishing the flow, their `otp_secret` had been changed therefore invalidating their previous authenticator app, making them unable to log in again using TOTP. Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> * refactor: fix eslint errors The PR build was failing given that linting returning some errors. This commit attempts to fix them. * refactor: normalize i18n translations The build was failing given that i18n translations files were not normalized. This commits fixes that. * refactor: avoid having the webauthn gem locked to a specific version * refactor: use symbols for routes without '/' * refactor: avoid sending webauthn disabled email when 2FA is disabled When an admins disable 2FA for users, we were sending two mails to them, one notifying that 2FA was disabled and the other to notify that WebAuthn was disabled. As the second one is redundant since the first email includes it, we can remove it and send just one email to users. * refactor: avoid creating new env variable for webauthn_origin config * refactor: improve flash error messages for webauthn pages Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com> 2020-08-24 14:46:27 +00:00			`= f.button :button, t('otp_authentication.enable'), type: :submit`