* Stop setting a shortcode to newly-created media attachments
The WebUI has stopped using the “short media URL” in ages. This isn't used
anywhere except for mail notifications.
Deprecating it would allow us to eventually get rid of at least a database
column and corruption-prone index, as well as a controller.
* Fix tests
* Add tests
* Add security-related tests
My first (unpublished) attempt at fixing the issues introduced (extremely
hard-to-exploit) security vulnerabilities, addressing them in a test.
* Fix authentication failures after going halfway through a sign-in attempt
* Refactor `authenticate_with_sign_in_token` and `authenticate_with_two_factor` to make the two authentication steps more obvious
* Add account statuses cleanup policy model
* Record last inspected toot to delete to speed up successive calls to statuses_to_delete
* Add service to cleanup a given account's statuses within a budget
* Add worker to go through account policies and delete old toots
* Fix last inspected status id logic
All existing statuses older or equal to last inspected status id must be
kept by the current policy. This is an invariant that must be kept so that
resuming deletion from the last inspected status remains sound.
* Add tests
* Refactor scheduler and add tests
* Add user interface
* Add support for discriminating based on boosts/favs
* Add UI support for min_reblogs and min_favs, rework UI
* Address first round of review comments
* Replace Snowflake#id_at_start with with_random parameter
* Add tests
* Add tests for StatusesCleanupController
* Rework settings page
* Adjust load-avoiding mechanisms
* Please CodeClimate
* Fix anonymous access to outbox not being cached by the reverse proxy
Up until now, anonymous access to outbox was marked as public, but with a
0 duration for caching, which means remote proxies would only serve from cache
when the server was completely overwhelmed.
Changed that cache duration to one minute, so that repeated anonymous access
to one account's outbox can be appropriately cached.
Also added `Signature` to the `Vary` header in case a page is requested, so
that authenticated fetches are never served from cache (which only contains
public toots).
* Remove Vary: Accept header from webfinger controller
Indeed, we have stopped returning xrd, and only ever return jrd, so the
Accept request header does not matter anymore.
* Cache negative webfinger hits for 3 minutes
* Add tests
* Fix serialization of followers/following counts when user hides their network
Fixes#16382
Signed-off-by: Claire <claire.github-309c@sitedethib.com>
* Fix issues with POSIX::Spawn, Terrapin and Ruby 3.0
Also improve the Terrapin monkey-patch for the stderr/stdout issue.
* Fix keyword argument handling throughout the codebase
* Monkey-patch Paperclip to fix keyword arguments handling in validators
* Change validation_extensions to please CodeClimate
* Bump microformats from 4.2.1 to 4.3.1
* Allow Ruby 3.0
* Add Ruby 3.0 test target to CircleCI
* Add test for admin dashboard warnings
* Fix admin dashboard warnings on Ruby 3.0
Clicking the confirmation link multiple times currently leads to entering
account settings, which can be confusing. This commit changes that so that
it redirects to the root path, so it behaves the same way as clicking only
once in most cases.
* Update devise-two-factor to unreleased fork for Rails 6 support
Update tests to match new `rotp` version.
* Update nsa gem to unreleased fork for Rails 6 support
* Update rails to 6.1.3 and rails-i18n to 6.0
* Update to unreleased fork of pluck_each for Ruby 6 support
* Run "rails app:update"
* Add missing ActiveStorage config file
* Use config.ssl_options instead of removed ApplicationController#force_ssl
Disabled force_ssl-related tests as they do not seem to be easily testable
anymore.
* Fix nonce directives by removing Rails 5 specific monkey-patching
* Fix fixture_file_upload deprecation warning
* Fix yield-based test failing with Rails 6
* Use Rails 6's index_with when possible
* Use ActiveRecord::Cache::Store#delete_multi from Rails 6
This will yield better performances when deleting an account
* Disable Rails 6.1's automatic preload link headers
Since Rails 6.1, ActionView adds preload links for javascript files
in the Links header per default.
In our case, that will bloat headers too much and potentially cause
issues with reverse proxies. Furhermore, we don't need those links,
as we already output them as HTML link tags.
* Switch to Rails 6.0 default config
* Switch to Rails 6.1 default config
* Do not include autoload paths in the load path
* Fix misuse of foreign_type
* Fix use of removed "add_template_helper"
* Use response.media_type instead of response.content_type in tests
* Fix CSV export controller test on Rails 6
Rails 6 sets a "filename*" field in the Content-Disposition header to
explicitly encode the filename as UTF-8.
This changes checks the first part of the Content-Disposition header so
it matches in both Rails 5 and Rails 6.
* Fix emoji formatting with Rails 6
* Make emoji output more idiomatic and robust
* Switch from redis-rails gem to built-in Rails redis cache storage
* Change ResolveAccountService's handling of skip_webfinger
Change it so it never makes any webfinger query, as the name would imply.
* Add tests
* Change FollowService to not take an URI for target_account
* Restore domain-block check in FollowService
* Fix tests
* Fix external user creation failing when invite request text is required
Also fixes tootctl-based user creation.
* Add test about invites when invite request text is otherwise required
Co-authored-by: Claire <claire.github-309c@sitedethib.com>
* Add honeypot fields to limit non-specialized spam
Add two honeypot fields: a fake website input and a fake password confirmation
one. The label/placeholder/aria-label tells not to fill them, and they are
hidden in CSS, so legitimate users should not fall into these.
This should cut down on some non-Mastodon-specific spambots.
* Require a 3 seconds delay before submitting the registration form
* Fix tests
* Move registration form time check to model validation
* Give people a chance to clear the honeypot fields
* Refactor honeypot translation strings
Co-authored-by: Claire <claire.github-309c@sitedethib.com>
If someone tries logging in to an account and is prompted for a 2FA
code or sign-in token, even if the account's password or e-mail is
updated in the meantime, the session will show the prompt and allow
the login process to complete with a valid 2FA code or sign-in token
* Add support for followers synchronization on the receiving end
Check the `collectionSynchronization` attribute on `Create` and `Announce`
activities and synchronize followers from provided collection if possible.
* Add tests for followers synchronization on the receiving end
* Add support for follower synchronization on the sender's end
* Add tests for the sending end
* Switch from AS attributes to HTTP header
Replace the custom `collectionSynchronization` ActivityStreams attribute by
an HTTP header (`X-AS-Collection-Synchronization`) with the same syntax as
the `Signature` header and the following fields:
- `collectionId` to specify which collection to synchronize
- `digest` for the SHA256 hex-digest of the list of followers known on the
receiving instance (where “receiving instance” is determined by accounts
sharing the same host name for their ActivityPub actor `id`)
- `url` of a collection that should be fetched by the instance actor
Internally, move away from the webfinger-based `domain` attribute and use
account `uri` prefix to group accounts.
* Add environment variable to disable followers synchronization
Since the whole mechanism relies on some new preconditions that, in some
extremely rare cases, might not be met, add an environment variable
(DISABLE_FOLLOWERS_SYNCHRONIZATION) to disable the mechanism altogether and
avoid followers being incorrectly removed.
The current conditions are:
1. all managed accounts' actor `id` and inbox URL have the same URI scheme and
netloc.
2. all accounts whose actor `id` or inbox URL share the same URI scheme and
netloc as a managed account must be managed by the same Mastodon instance
as well.
As far as Mastodon is concerned, breaking those preconditions require extensive
configuration changes in the reverse proxy and might also cause other issues.
Therefore, this environment variable provides a way out for people with highly
unusual configurations, and can be safely ignored for the overwhelming majority
of Mastodon administrators.
* Only set follower synchronization header on non-public statuses
This is to avoid unnecessary computations and allow Follow-related
activities to be handled by the usual codepath instead of going through
the synchronization mechanism (otherwise, any Follow/Undo/Accept activity
would trigger the synchronization mechanism even if processing the activity
itself would be enough to re-introduce synchronization)
* Change how ActivityPub::SynchronizeFollowersService handles follow requests
If the remote lists a local follower which we only know has sent a follow
request, consider the follow request as accepted instead of sending an Undo.
* Integrate review feeback
- rename X-AS-Collection-Synchronization to Collection-Synchronization
- various minor refactoring and code style changes
* Only select required fields when computing followers_hash
* Use actor URI rather than webfinger domain in synchronization endpoint
* Change hash computation to be a XOR of individual hashes
Makes it much easier to be memory-efficient, and avoid sorting discrepancy issues.
* Marginally improve followers_hash computation speed
* Further improve hash computation performances by using pluck_each
There are edge cases where requests to certain hosts timeout when
using the vanilla HTTP.rb gem, which the goldfinger gem uses. Now
that we no longer need to support OStatus servers, webfinger logic
is so simple that there is no point encapsulating it in a gem, so
we can just use our own Request class. With that, we benefit from
more robust timeout code and IPv4/IPv6 resolution.
Fix#14091
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Do not serve account actors at all in limited federation mode
When an account is fetched without a signature from an allowed instance,
return an error.
This isn't really an improvement in security, as the only information that was
previously returned was required protocol-level info, and the only personal bit
was the existence of the account. The existence of the account can still be
checked by issuing a webfinger query, as those are accepted without signatures.
However, this change makes it so that unallowed instances won't create account
records on their end when they find a reference to an unknown account.
The previous behavior of rendering a limited list of fields, instead of not
rendering the actor at all, was in order to prevent situations in which two
instances in Authorized Fetch mode or Limited Federation mode would fail to
reach each other because resolving an account would require a signed query…
from an account which can only be fetched with a signed query itself. However,
this should now be fine as fetching accounts is done by signing on behalf of
the special instance actor, which does not require any kind of valid signature
to be fetched.
* Fix tests
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* Add tests for some cachable responses
This only covers responses that we should have managed to make cachable
so far. It's not the case of all responses that should be cachable in
the end.
* Fix RSS feeds not being cachable
Instead of returning a signature verification error, pretend there
was no signature (i.e., this does not allow access to resources that
need a valid signature), so public resources can still be fetched
Fix#13011
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
* Hide blocked, muted, and blocked-by users from toot favourite lists
* Hide blocked, muted, and blocked-by users from toot reblog lists
* Hide blocked, muted, and blocked-by users from followers/following (API)
* Fix tests
* Hide blocked, muted, and blocked-by users from followers/following on public pages
* Revert "Fix ignoring whole status because of one invalid hashtag (#11621)"
This reverts commit dff46b260b.
* Fix statuses being rejected because of invalid hashtag names
* Add spec for invalid hashtag names in statuses
* Add test for featured tags controller
* make it not return http 400 when passing and empty source argument
* create a spec for the empty source hash bug
* compact checks for nil, empty? parameters
* use nil.blank? instead checking for nil
* Add backend support for bookmarks
Bookmarks behave like favourites, except they aren't shared with other
users and do not have an associated counter.
* Add spec for bookmark endpoints
* Add front-end support for bookmarks
* Introduce OAuth scopes for bookmarks
* Add bookmarks to archive takeout
* Fix migration
* Coding style fixes
* Fix rebase issue
* Update bookmarked_statuses to latest UI changes
* Update bookmark actions to properly reflect status changes in state
* Add bookmarks item to single-column layout
* Make active bookmarks red
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* Add some additional node info stuff
* Add nodeinfo endpoint
* dont commit stuff from my local dev
* consistant naming since we implimented 2.1 schema
* expanding this to include federation info
* codeclimate feedback
* CC feedback
* using activeserializers seems like a good idea...
* get rid of draft 2.1 version
* Reimplement 2.1, also fix metaData -> metadata
* Fix metaData -> metadata here too
* Fix nodeinfo 2.1 tests
* Implement cache for monthly user aggregate
* Useless
* Remove ostatus from the list of supported protocols
* Fix nodeinfo's open_registration reading obsolete setting variable
* Only serialize domain blocks with user-facing limitations
* Do not needlessly list noop severity in nodeinfo
* Only serialize domain blocks info in nodeinfo when they are set to be displayed to everyone
* Enable caching for nodeinfo endpoints
* Fix rendering nodeinfo
* CodeClimate fixes
* Please CodeClimate
* Change InstancePresenter#active_user_count_months for clarity
* Refactor NodeInfoSerializer#metadata
* Remove nodeinfo 2.1 support as the schema doesn't exist
* Clean-up
The reason for unattaching media instead of removing it is to support
delete & redraft functionality, but remote or staff-removed statuses
will never be redrafted, so the media should be deleted immediately
Fix#271
Add back the `GET /api/v1/trends` API with the caveat that it does
not return tags that have not been allowed to trend by the staff.
When a hashtag begins to trend (internally) and that hashtag has
not been previously reviewed by the staff, the staff is notified.
The new admin UI for hashtags allows filtering hashtags by where
they are used (e.g. in the profile directory), whether they have
been reviewed or are pending reviewal, they show by how many people
the hashtag is used in the directory, how many people used it
today, how many statuses with it have been created today, and it
allows fixing the name of the hashtag to make it more readable.
The disallowed hashtags feature has been reworked. It is now
controlled from the admin UI for hashtags instead of from
the file `config/settings.yml`
Allow access to account settings, 2FA, authorized applications, and
account deletions to unconfirmed and pending users, as well as
users who had their accounts disabled. Suspended users cannot update
their e-mail or password or delete their account.
Display account status on account settings page, for example, when
an account is frozen, limited, unconfirmed or pending review.
After sign up, login users straight away and show a simple page that
tells them the status of their account with links to account settings
and logout, to reduce onboarding friction and allow users to correct
wrongly typed e-mail addresses.
Move the final sign-up step of SSO integrations to be the same
as above to reduce code duplication.
* Remove Salmon and PubSubHubbub endpoints
* Add error when trying to follow OStatus accounts
* Fix new accounts not being created in ResolveAccountService
* Fix poll API not requiring authentication on non-public polls
That API does not reveal the content of the status, i.e. the question
itself, nor who the author is, nor which status it belongs to, but it
does reveal the poll options and how many answers they got
Fix#10959
* Add test
* Add `from_account` to notifications API
this adds the ability to filter notifications by the account they
originated from
* passing a non-existent user should cause none to be returned
* Fix codeclimate warnings
* fix more codeclimate warnings
* make requested changes:
* use account id instead of user@domain
* name the param `account_id` instead of `from_account`
* Don't use `return` in a lambda
