* Add support for followers synchronization on the receiving end
Check the `collectionSynchronization` attribute on `Create` and `Announce`
activities and synchronize followers from provided collection if possible.
* Add tests for followers synchronization on the receiving end
* Add support for follower synchronization on the sender's end
* Add tests for the sending end
* Switch from AS attributes to HTTP header
Replace the custom `collectionSynchronization` ActivityStreams attribute by
an HTTP header (`X-AS-Collection-Synchronization`) with the same syntax as
the `Signature` header and the following fields:
- `collectionId` to specify which collection to synchronize
- `digest` for the SHA256 hex-digest of the list of followers known on the
receiving instance (where “receiving instance” is determined by accounts
sharing the same host name for their ActivityPub actor `id`)
- `url` of a collection that should be fetched by the instance actor
Internally, move away from the webfinger-based `domain` attribute and use
account `uri` prefix to group accounts.
* Add environment variable to disable followers synchronization
Since the whole mechanism relies on some new preconditions that, in some
extremely rare cases, might not be met, add an environment variable
(DISABLE_FOLLOWERS_SYNCHRONIZATION) to disable the mechanism altogether and
avoid followers being incorrectly removed.
The current conditions are:
1. all managed accounts' actor `id` and inbox URL have the same URI scheme and
netloc.
2. all accounts whose actor `id` or inbox URL share the same URI scheme and
netloc as a managed account must be managed by the same Mastodon instance
as well.
As far as Mastodon is concerned, breaking those preconditions require extensive
configuration changes in the reverse proxy and might also cause other issues.
Therefore, this environment variable provides a way out for people with highly
unusual configurations, and can be safely ignored for the overwhelming majority
of Mastodon administrators.
* Only set follower synchronization header on non-public statuses
This is to avoid unnecessary computations and allow Follow-related
activities to be handled by the usual codepath instead of going through
the synchronization mechanism (otherwise, any Follow/Undo/Accept activity
would trigger the synchronization mechanism even if processing the activity
itself would be enough to re-introduce synchronization)
* Change how ActivityPub::SynchronizeFollowersService handles follow requests
If the remote lists a local follower which we only know has sent a follow
request, consider the follow request as accepted instead of sending an Undo.
* Integrate review feeback
- rename X-AS-Collection-Synchronization to Collection-Synchronization
- various minor refactoring and code style changes
* Only select required fields when computing followers_hash
* Use actor URI rather than webfinger domain in synchronization endpoint
* Change hash computation to be a XOR of individual hashes
Makes it much easier to be memory-efficient, and avoid sorting discrepancy issues.
* Marginally improve followers_hash computation speed
* Further improve hash computation performances by using pluck_each
There are edge cases where requests to certain hosts timeout when
using the vanilla HTTP.rb gem, which the goldfinger gem uses. Now
that we no longer need to support OStatus servers, webfinger logic
is so simple that there is no point encapsulating it in a gem, so
we can just use our own Request class. With that, we benefit from
more robust timeout code and IPv4/IPv6 resolution.
Fix#14091
* Add bell button
Fix#4890
* Remove duplicate type from post-deployment migration
* Fix legacy class type mappings
* Improve query performance with better index
* Fix validation
* Remove redundant index from notifications
* Add database support for list show-reply preferences
* Add backend support to read and update list-specific show_replies settings
* Add basic UI to set list replies setting
* Add specs for list replies policy
* Switch "cycling" reply policy link to a set of radio inputs
* Capitalize replies_policy strings
* Change radio button design to be consistent with that of the directory explorer
* Make Array-creation behavior of Paginable more predictable
Paginable.paginate_by_id usually returns ActiveRecord::Relation, but it
returns an Array if min_id option is present. The behavior caused problems
fixed with the following commits:
- 552e886b64
- b63ede5005
- 64ef37b89d
To prevent from recurring similar problems, this commit introduces two
changes:
- The scope now always returns an Array whether min_id option is present
or not.
- The scope is renamed to to_a_paginated_by_id to clarify it returns an
Array.
* Transform Paginable.to_a_paginated_by_id from a scope to a class method
https://api.rubyonrails.org/classes/ActiveRecord/Scoping/Named/ClassMethods.html#method-i-scope
> The method is intended to return an ActiveRecord::Relation object, which
> is composable with other scopes.
Paginable.to_a_paginated_by_id returns an Array and is not appropriate
as a scope.
* feat: add possibility of adding WebAuthn security keys to use as 2FA
This adds a basic UI for enabling WebAuthn 2FA. We did a little refactor
to the Settings page for editing the 2FA methods – now it will list the
methods that are available to the user (TOTP and WebAuthn) and from
there they'll be able to add or remove any of them.
Also, it's worth mentioning that for enabling WebAuthn it's required to
have TOTP enabled, so the first time that you go to the 2FA Settings
page, you'll be asked to set it up.
This work was inspired by the one donde by Github in their platform, and
despite it could be approached in different ways, we decided to go with
this one given that we feel that this gives a great UX.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add request for WebAuthn as second factor at login if enabled
This commits adds the feature for using WebAuthn as a second factor for
login when enabled.
If users have WebAuthn enabled, now a page requesting for the use of a
WebAuthn credential for log in will appear, although a link redirecting
to the old page for logging in using a two-factor code will also be
present.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: add possibility of deleting WebAuthn Credentials
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: disable WebAuthn when an Admin disables 2FA for a user
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* feat: remove ability to disable TOTP leaving only WebAuthn as 2FA
Following examples form other platforms like Github, we decided to make
Webauthn 2FA secondary to 2FA with TOTP, so that we removed the
possibility of removing TOTP authentication only, leaving users with
just WEbAuthn as 2FA. Instead, users will have to click on 'Disable 2FA'
in order to remove second factor auth.
The reason for WebAuthn being secondary to TOPT is that in that way,
users will still be able to log in using their code from their phone's
application if they don't have their security keys with them – or maybe
even lost them.
* We had to change a little the flow for setting up TOTP, given that now
it's possible to setting up again if you already had TOTP, in order to
let users modify their authenticator app – given that now it's not
possible for them to disable TOTP and set it up again with another
authenticator app.
So, basically, now instead of storing the new `otp_secret` in the
user, we store it in the session until the process of set up is
finished.
This was because, as it was before, when users clicked on 'Edit' in
the new two-factor methods lists page, but then went back without
finishing the flow, their `otp_secret` had been changed therefore
invalidating their previous authenticator app, making them unable to
log in again using TOTP.
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
* refactor: fix eslint errors
The PR build was failing given that linting returning some errors.
This commit attempts to fix them.
* refactor: normalize i18n translations
The build was failing given that i18n translations files were not
normalized.
This commits fixes that.
* refactor: avoid having the webauthn gem locked to a specific version
* refactor: use symbols for routes without '/'
* refactor: avoid sending webauthn disabled email when 2FA is disabled
When an admins disable 2FA for users, we were sending two mails
to them, one notifying that 2FA was disabled and the other to notify
that WebAuthn was disabled.
As the second one is redundant since the first email includes it, we can
remove it and send just one email to users.
* refactor: avoid creating new env variable for webauthn_origin config
* refactor: improve flash error messages for webauthn pages
Co-authored-by: Facundo Padula <facundo.padula@cedarcode.com>
Since #14145, the `set_type_and_extension` has been moved from
`before_post_process` to `before_file_post_process`, but while the former
runs before all validations performed by Paperclip, the latter is dependent
on the order validations and hooks are defined.
In our case, this meant video files could be checked against the generic 10MB
limit, causing validation failures, which, internally, make Paperclip skip
post-processing, and thus, transcoding of the video file.
The actual validation would then happen after the type is correctly set, so
the large file would pass validation, but without being transcoded first.
This commit moves the hook definition so that it is run before checking for
the file size.
* Add UserNote model
* Add UI for user notes
* Put comment in relationships entity
* Add API to create user notes
* Copy user notes to new account when receiving a Move activity
* Address some of the review remarks
* Replace modal by inline edition
* Please CodeClimate
* Button design changes
* Change design again
* Cancel note edition when pressing Escape
* Fixes
* Tweak design again
* Move “Add note” item, and allow users to add notes to themselves
* Rename UserNote into AccountNote, rename “comment” Relationship attribute to “note”
- Change audio files to not be stripped of metadata
- Automatically extract cover art from audio if it exists
- Add `thumbnail` parameter to `POST /api/v1/media`, `POST /api/v2/media` and `PUT /api/v1/media/:id`
- Add `icon` to represent it in attachments in ActivityPub
- Fix `preview_url` containing URL of missing missing image when there is no thumbnail instead of null
- Fix duration of audio not being displayed on public pages until the file is loaded
- Fix audio attachments not being represented in OpenGraph tags
- Fix audio being represented as "1 image" in OpenGraph descriptions
- Fix video metadata being overwritten by paperclip-av-transcoder
- Fix embedded player not using Mastodon's UI
- Fix audio/video progress bars not moving smoothly
- Fix audio/video buffered bars not displaying correctly
* Fix admin page crashing when trying to block an invalid domain name
Fixes#13880
* Fix trailing and leading spaces not being properly stripped for domain blocks
* Improve RSS entries for statuses
- Render polls in both accounts and tags serializers
- Refactor RSS serializers
- Change title preview to include ellipsis when truncated
- Change title preview to show CW instead of toot text
- Add tests
* Remove title from OEmbed serialization
Twitter doesn't serialize title either, and tihs allows us to move the
title formatting code to the RSS serializers.
When deduplicating account usernames for OAuthable users, the routine did check if any account was known with that username, including remote accounts. This caused some unnecessary deduplication, and usernames ending with unexpected trailing _1.
This fixes#13580
Follow-up to #13452, fixing broken `uri.nil?` test.
Also remove the separate check for `uri` presence, as that would result
in a “Please review 2 errors below” while only one would be listed.
* Fix “Email changed” notification sometimes having wrong e-mail
Fixes#6778
The root of the issue is that `send_devise_notification` was called before
the changes were properly commited to the database, causing the mailer to
pick previous values if running too early.
Devise's documentation provides guidance on how to handle that[1][2], however,
I have found it to not be working, as the following happens, in that order:
- `send_devise_notification` is called for the `email_changed` notification.
In that case, `changed?` is false and `saved_changes?` is true, so
if we use the former, we have the same issue.
- the `after_commit` hook is called
- `send_devise_notification` is called for the `confirmation_instructions`
notification.
In that case, `changed?` is still false, and `saved_changes?` still true,
so if we use the latter, that second notification email is simply not
going to be sent (as we would be queuing the notification *after*
executing the after_commit hook).
This is because it may be called from either an `after_update` or
`after_commit` hook, the difference not being a call to `save` but the
transaction actually being committed to the database. This may arguably
be a bug in Devise, or Devise's notification.
The proposed workaround is inspired by Devise's documentation but checks
whether a transaction is open to make the call whether to immediately
send the notification or defer it to the `after_commit` hook.
[1]: https://www.rubydoc.info/github/plataformatec/devise/Devise%2FModels%2FAuthenticatable:send_devise_notification
[2]: 406915cb78/lib/devise/models/authenticatable.rb (L133-L194)
* Fix cases when sending notifications without changing the model
* Defer sending if and only if in transaction including current record
* Fix PostgreSQL load when linking in announcements
Fixes#13245 by caching status lookups
Since statuses are supposed to be known already and we only
need their URLs and a few other things, caching them should
be fine.
Since it's only used by announcements so far, there won't
be much statuses to cache.
* Perform status lookup when saving announcements, not when rendering them
* Change EntityCache#status to fetch URLs instead of looking into the database
* Move announcement link lookup to publishing worker
* Address issues pointed out during review
* Change ActivityPub follower/following collections to not link first page
* Add support for hiding followers and following of remote users
* Switch to using a single `hide_collections` column
* Address code style remarks
Change `all_day` to be a visual client-side cue only
Publish immediately if `scheduled_at` is in the past
Add `published_at` and `updated_at` to announcements JSON
While making browser requests in the other sessions after a password
change or reset does not allow you to be logged in and correctly
invalidates the session making the request, sessions have API tokens
associated with them, which can still be used until that session
is invalidated.
This is a security issue for accounts that were already compromised
some other way because it makes it harder to throw out the hijacker.
* Add announcements
Fix#11006
* Add reactions to announcements
* Add admin UI for announcements
* Add unit tests
* Fix issues
- Add `with_dismissed` param to announcements API
- Fix end date not being formatted when time range is given
- Fix announcement delete causing reactions to send streaming updates
- Fix announcements container growing too wide and mascot too small
- Fix `all_day` being settable when no time range is given
- Change text "Update" to "Announcement"
* Fix scheduler unpublishing announcements before they are due
* Fix filter params not being passed to announcements filter
Allow browsing and filtering all relationships instead of just
followers, unify the codebase with the user-facing relationship
manager, add ability to see who the user invited
* Fix unused role routes being generated
* Remove unused JavaScript code
* Refactor filters code to be DRYer
* Fix `.count == 0` comparisons to `.empty?` in views
* Fix filters in views
Fixes#12795
It was already possible to create domain blocks for TLDs, but those
weren't enforced, nor editable. This commit changes it so that they
are enforced and editable.
This changes the REST API to return unicode domains in the `acct`
attribute instead of punycode, and to render unicode instead of
punycode on public HTML pages as well.
Fix#7812, fix#12246
* Revert "Fix ignoring whole status because of one invalid hashtag (#11621)"
This reverts commit dff46b260b.
* Fix statuses being rejected because of invalid hashtag names
* Add spec for invalid hashtag names in statuses
* Add test for featured tags controller
* Show badge on group actor in WebUI
* Do not notify in case of by following group actor
* If you mention group actor, also mention group actor followers
* Relax characters that can be used in username (same as Application)
* Revert "Relax characters that can be used in username (same as Application)"
This reverts commit 7e10a137b878d0db1b5252c52106faef5e09ca4b.
* Delete display_name method
* Add follow_request notification type
The notification type already existed in the backend but was never pushed
to the front-end. This also means translation strings were also available
for the backend, from the notification mailer.
Unlike other notification types, these are off by default, to match what
I remember of Gargron's view on the topic: that follow requests should not
clutter notifications and should instead be reviewed at the user's own
leisure in the dedicated column.
Since follow requests have their own column, I've deemed it unnecessary to
add a specific tab for them in the notification quick filter.
* Show follow request link in single-column if there are pending requests, even if account isn't locked
* Push follow requests from notifications to the follow_requests list
* Offer to accept or reject follow request from the notification
* Redesign follow request notification
Before this patch, if remote poll options have leading or trailing spaces,
the information stored locally won't match them, causing federated voting to
fail.
* Add backend support for bookmarks
Bookmarks behave like favourites, except they aren't shared with other
users and do not have an associated counter.
* Add spec for bookmark endpoints
* Add front-end support for bookmarks
* Introduce OAuth scopes for bookmarks
* Add bookmarks to archive takeout
* Fix migration
* Coding style fixes
* Fix rebase issue
* Update bookmarked_statuses to latest UI changes
* Update bookmark actions to properly reflect status changes in state
* Add bookmarks item to single-column layout
* Make active bookmarks red
* Add ability to add oneself to lists
* Change search results to include oneself when searching through followers
* Mark follow relation as optional in ListAccount
Change the behaviour of remotable concern. Previously, it would skip
downloading an attachment if the stored remote URL is identical to
the new one. Now it would not be skipped if the attachment is not
actually currently stored by Paperclip.
Fetching statuses from all followed accounts at once takes too long
within Postgres. Fetching them one by one and merging in Ruby
could be a lot less resource-intensive
Because the query for dynamically fetching the home timeline is so
heavy, we can no longer offer it when the home timeline is missing
* Change animated GIF detection to not shell out to ImageMagick
Signed-off-by: Eugen Rochko <eugen@zeonfederated.com>
* Change video encoding parameters to limit to 10800 video frames
Signed-off-by: Eugen Rochko <eugen@zeonfederated.com>
* Limit GIF image size further
Signed-off-by: Eugen Rochko <eugen@zeonfederated.com>
* Always strip metadata from video files
* Fix code style issues
It's possible that after commit callbacks were not firing when
exceptions occurred in the process. Also, the default Sidekiq
strategy does not push indexing jobs immediately, which is not
necessary and could be part of the issue too.
* Add voters count to polls
* Add ActivityPub serialization and parsing of voters count
* Add support for voters count in WebUI
* Move incrementation of voters count out of redis lock
* Reword “voters” to “people”
* Addition of update activity distribution by alias, minor correction
* Distribute Update activity after adding alias
* Add uniqueness verification to alias uri
* accept acct starting with @
* fix double-quoted to single-quoted
* Add search and sort functions to hashtag admin UI
* Move scope processing from tags_controller to tag_filter
* Fix based on method naming conventions
* Fixed not to get 500 errors for invalid requests
* Add soft delete for statuses to allow them to appear instant
* Allow reporting soft-deleted statuses and show them in the admin UI
* Change index for getting an account's statuses
The reason for unattaching media instead of removing it is to support
delete & redraft functionality, but remote or staff-removed statuses
will never be redrafted, so the media should be deleted immediately
* Add automatic blocklist display in /about/blocks
Inspired by https://github.com/Gargron/mastodon.social-misc
* Add admin option to set who can see instance blocks
* Normalize locales files
* Rename “Sandbox” to “Silence” for consistency
* Disable /about/blocks when in whitelist mode
* Optionally display rationale for domain blocks
* Only display domain blocks that have user-facing limitations, and order them
* Redesign table of blocked domains to better handle long domain names and rationales
* Change domain blocks ordering now that rationales aren't displayed right away
* Only show explanation for block severities actually in use
* Reword instance block explanations and add disclaimer for public fetch mode
* Add more accurate hashtag search
Using ElasticSearch to index hashtags with edge n-grams and score
them by usage within the last 7 days since last activity. Only
hashtags that have been reviewed and are listable can appear in
searches, unless they match the query exactly
* Fix search analyzer dropping non-ascii characters
* Add more accurate account search
When ElasticSearch is available, a more accurate search is implemented:
- Using edge n-gram index for acct and display name
- Using asciifolding and cjk width normalization on display names
- Using Gaussian decay on account activity for additional scoring (recency)
- Using followers/friends ratio for additional scoring (spamminess)
- Using followers number for additional scoring (size)
The exact match precedence only takes effect when the input conforms
to the username format and the username part of it is complete, i.e.
when the user started typing the domain part.
* Support single-letter usernames
* Fix tests
* Fix not picking up account updates
* Add weights and normalization for scores, skip zero terms queries
* Use local counts for accounts index, adjust search parameters
* Fix mistakes
* Using updated_at of accounts is inadequate for remote accounts
Fix percentages in usage breakdown having too many digits
Change trending hashtags to only ask for review if a hashtag enters
the top 3 position in the set, since it's the only items shown in
the default web UI
* Add database columns for adding notes to domain blocks/restrctions
* Add admin UI to set private and public comments when blocking a domain
* Add text for private and public comments on domain blocks
* Show domain block comments in admin UI
* Add comments to the domain block undo page
* Make UnblockDomainService more robust regarding upgraded domain blocks
* Allow editing domain blocks
* Rename button from “undo domain block” to “view domain block” in account admin UI
* Change test to unsilence silenced users from upgraded blocks
* Fix account tags not being saved correctly
Regression from f371b32
Fix Tag#discoverable not returning tags where listable is nil instead of true
Add notice when saving hashtags in admin UI
Change public hashtag and directory pages to return 404 for forbidden tags
* Remove unused locale string
Fix#271
Add back the `GET /api/v1/trends` API with the caveat that it does
not return tags that have not been allowed to trend by the staff.
When a hashtag begins to trend (internally) and that hashtag has
not been previously reviewed by the staff, the staff is notified.
The new admin UI for hashtags allows filtering hashtags by where
they are used (e.g. in the profile directory), whether they have
been reviewed or are pending reviewal, they show by how many people
the hashtag is used in the directory, how many people used it
today, how many statuses with it have been created today, and it
allows fixing the name of the hashtag to make it more readable.
The disallowed hashtags feature has been reworked. It is now
controlled from the admin UI for hashtags instead of from
the file `config/settings.yml`
* Change hashtag search to only return results that have trended in the past
A way to eliminate typos and other one-off "junk" results
* Fix excluding exact matches that don't have a score
* Fix tests
Allow access to account settings, 2FA, authorized applications, and
account deletions to unconfirmed and pending users, as well as
users who had their accounts disabled. Suspended users cannot update
their e-mail or password or delete their account.
Display account status on account settings page, for example, when
an account is frozen, limited, unconfirmed or pending review.
After sign up, login users straight away and show a simple page that
tells them the status of their account with links to account settings
and logout, to reduce onboarding friction and allow users to correct
wrongly typed e-mail addresses.
Move the final sign-up step of SSO integrations to be the same
as above to reduce code duplication.
* Add support for an instance actor
* Skip username validation for local Application accounts
* Add migration script to create instance actor
* Make Codeclimate happy
* Switch to id -99 for instance actor
* Remove unused `icon` and `image` attributes from instance actor
* Use if/elsif/else instead of return + ternary operator
* Add instance actor to fresh installs
* Use instance actor as instance representative
Use instance actor for forwarding reports, relay operations, and spam
auto-reporting.
* Seed database in test environment
* Fix single-user mode
* Fix tests
* Fix specs to accomodate for an extra `Account`
* Auto-reject follows on instance actor
Following an instance actor might make sense, but we are not handling that
right now, so auto-reject.
* Fix webfinger lookup and serialization for instance actor
* Rename instance actor
* Make it clear in the HTML view that the instance actor should not be blocked
* Raise cache time for instance actor as there's no dynamic content
* Re-use /about/more with a flash message for instance actor profile
* Add a spam check
* Use Nilsimsa to generate locality-sensitive hashes and compare using Levenshtein distance
* Add more tests
* Add exemption when the message is a reply to something that mentions the sender
* Use Nilsimsa Compare Value instead of Levenshtein distance
* Use MD5 for messages shorter than 10 characters
* Add message to automated report, do not add non-public statuses to
automated report, add trust level to accounts and make unsilencing
raise the trust level to prevent repeated spam checks on that account
* Expire spam check data after 3 months
* Add support for local statuses, reduce expiration to 1 week, always create a report
* Add content warnings to the spam check and exempt empty statuses
* Change Nilsimsa threshold to 95 and make sure removed statuses are removed from the spam check
* Add all matched statuses into automatic report
* Remove Salmon and PubSubHubbub endpoints
* Add error when trying to follow OStatus accounts
* Fix new accounts not being created in ResolveAccountService
* Change domain blocks to automatically support subdomains
If a more authoritative domain is blocked (example.com), then the
same block will be applied to a subdomain (foo.example.com)
* Match subdomains of existing accounts when blocking/unblocking domains
* Improve code style
* Add audio uploads
Fix#4827
Accept uploads of OGG, WAV, FLAC, OPUS and MP3 files, and converts
them to OGG. Media attachments get a new `audio` type. In the UI,
audio uploads are displayed identically to video uploads.
* Improve code style
* Add responsive panels to the single-column layout
* Fixes
* Fix not being able to save the preference
* Fix code style issues
* Set max-height on the compose textarea and add a link to relationship manager
* Add `from_account` to notifications API
this adds the ability to filter notifications by the account they
originated from
* passing a non-existent user should cause none to be returned
* Fix codeclimate warnings
* fix more codeclimate warnings
* make requested changes:
* use account id instead of user@domain
* name the param `account_id` instead of `from_account`
* Don't use `return` in a lambda
* Change note_length validator from 160 to 500
* Change input maxlength from 160 to 500
* update bio test from 160 to 500
* Multiply a string 30 times instead of 10
* Record account suspend/silence time and keep track of domain blocks
* Also unblock users who were suspended/silenced before dates were recorded
* Add tests
* Keep track of suspending date for users suspended through the CLI
* Show accurate number of accounts that would be affected by unsuspending an instance
* Change migration to set silenced_at and suspended_at
* Revert "Also unblock users who were suspended/silenced before dates were recorded"
This reverts commit a015c65d2d1e28c7b7cfab8b3f8cd5fb48b8b71c.
* Switch from using suspended and silenced to suspended_at and silenced_at
* Add post-deployment migration script to remove `suspended` and `silenced` columns
* Use Account#silence! and Account#suspend! instead of updating the underlying property
* Add silenced_at and suspended_at migration to post-migration
* Change account fabricator to translate suspended and silenced attributes
* Minor fixes
* Make unblocking domains always retroactive
* When trying to block an already-blocked domain, provide a link to the block
* Fix styling for links in flash messages
* Allow blocks to be upgraded but not downgraded
* Check that an invite link is valid before bypassing approval mode
Fixes#10656
* Add tests
* Only consider valid invite links in registration controller
* fixup
* Add blurhash
* Use fallback color for spoiler when blurhash missing
* Federate the blurhash and accept it as long as it's at most 5x5
* Display unknown media attachments as blurhash placeholders
* Improve style of embed actions and spoiler button
* Change blurhash resolution from 3x3 to 4x4
* Improve dependency definitions
* Fix code style issues
* Add "why do you want to join" field to invite requests
Fix#10512
* Remove unused translations
* Fix broken registrations when no invite request text is submitted
* Refactor imports
* Export show_reblogs when exporting list of followed users
* Add support for importing show_reblogs with following collection
* Fix tests
* Revert "Fix filtering of favourited_by, reblogged_by, followers and following (#10447)"
This reverts commit 120544067f.
* Revert "Hide blocking accounts from blocked users (#10442)"
This reverts commit 62bafa20a1.
* Improve blocked view of profiles
- Change "You are blocked" to "Profile unavailable"
- Hide following/followers in API when blocked
- Disable follow button and show "Profile unavailable" on public profile as well
* Revert "Add indication that you have been blocked in web UI (#10420)"
This reverts commit bd02ec6daa.
* Revert "Add `blocked_by` relationship to the REST API (#10373)"
This reverts commit 9745de883b.
* Hide blocking accounts from search results
* Filter blocking accouts from account followers
* Filter blocking accouts from account's following accounts
* Filter blocking accounts from “reblogged by” and “favourited by” lists
* Remove blocking account from URL search
* Return 410 on trying to fetch user data from a user who blocked us
* Return 410 in /api/v1/account/statuses for suspended or blocking accounts
* Fix status filtering when performing URL search
* Restore some React improvements
Restore some cleanup from bd02ec6daa
* Refactor by adding `without_blocking` scope
* Check if image value is nil? before creating an image
Check if uploaded images aren't nil before creating SiteUpload models
for them.
* Validate presence of file in SiteUpload
* Fix file presence validation
* Fabricate SiteUpload#file
* Add link to Creative Commons license
Red crosses implied that it was bad/unexpected that certain features
were not enabled. In reality, they are options, so showing a green
or grey power-off icon is more appropriate.
Add status of timeline preview as well
Fix sample accounts changing too frequently due to wrong query
Sample accounts are intended to be sorted by popularity
